Lokar TL-1911 Chromed Billet Oval LED Taillights User Manual download pdf

Building American Quality… With A Lifetime Warranty!

Step 5: Install the supplied 8-32 set screws through the retain-

ing brackets and hand tighten against the oval washer.

See Photo 5

Step 6: Using a cross pattern, gently tighten the 8-32 set screws

until the taillight has been drawn to the body panel.

Warning: Do not over tighten to avoid damage to paint.

Stop! Please read all installation instructions before

beginning installation. Call Lokar for any questions or

uncertainties during installation.

WARNING: Disconnect battery before beginning instal-

lation. Make sure vehicle is in Park. Be sure that the

vehicle’s parking brake is set and scotched to avoid

movement of the vehicle.

IMpoRtANt: Before beginning any cutting, be sure

there is adequate clearance behind the body panel for

the installation of the taillight.

Chromed Billet Oval LED Taillights Installation

NOTE: The taillight is shipped fully assembled for Quality

Control. DO NOT REMOVE the back plate as parts may

be lost.

Step 1: Using the provided template, layout and cut an

opening in the desired location. See Photo 1

Note: It is crucial that the opening not be oversized to

ensure proper fit.

Step 2: Insert the taillight carefully through the opening.

See Photo 2

Step 3: Install the oval washer around the taillight.

See Photo 3

Step 4: Install the two retaining brackets using the supplied

6-32 socket head allen bolts. See Photo 4

10924 Murdock Dr. • Knoxville, TN 37932

TOLL FREE 1-877-469-7440 • (865) 966-2269 • FAX (865) 671-1999 • [email protected] • www.lokar.com

Chromed Billet Oval LED Taillights Installation Instructions

Part # TL-1910 and TL-1911

Chromed Billet Oval LED Taillights Installation Instructions

Part # TL-1910 and TL-1911

Step 7: Install supplied 8-32 jam nuts onto set screws and

tighten. See Photo 6

Step 8: Wire taillights into 12 volt system.

Note: Due to low current draw of LED lights,

some vehicles may require a “No Load Flasher”.

Available from Lokar, Part No. TL-1912

GREEN = Brake wire (turn signals controlled by turn signal switch)

YELLoW = Taillight wire (running lights)

BLACK = Connect to a GOOD chassis ground

Photo 1 Photo 2 Photo 3

Photo 4 Photo 5 Photo 6

Rev. 5/15/08

™

Part # TL-1910 and TL-1911 1

Summary of Contents

Page 1 - Part # TL-1910 and TL-1911

Building American Quality… With A Lifetime Warranty!Step 5: Install the supplied 8-32 set screws through the retain-ing brackets and hand tighten aga

Comments to this Manuals

No comments

Lokar TL-1911 Chromed Billet Oval LED Taillights User Manual

Browse online or download User Manual for For the car Lokar TL-1911 Chromed Billet Oval LED Taillights. Lokar TL-1911 Chromed Billet Oval LED Taillights User Manual [en]

Summary of Contents

Comments to this Manuals

Related products and manuals for For the car Lokar TL-1911 Chromed Billet Oval LED Taillights